Qimir The Stranger Full Armour DIY Kit The Acolyte
Qimir The Stranger Full Armour DIY Kit The Acolyte
*PLEASE NOTE- This is a DIY kit. The parts will need sanding, filling and painting and the fun is all in the build!
The enigmatic Qimir from The Acolyte series. Here we have all his hard parts needed for his cosplay; The Helmet, Gauntlet and ‘X’ brace. The Gauntlet comes in 2 main parts ‘clam shell’ style and joins with (4mm x 8mm) cylindrical neodymium magnets and the seam line is hidden along the textures of the gauntlet itself.
All parts are seperate for easier building and painting and as with all our helmets, accuracy is our obsession.
Actual Raw 3d printed parts received are:
Helmet
• Helmet Dome
• Helmet Face
• Helmet Jaw
• Chin Greeblies
• Teeth (6 partss
Gauntlet
• Gauntlet (2 Parts)
• Metal Greeblies (2 parts)
• ’X’ Brace
We are extremely proud of this model!
MATERIAL
Printed in PLA, a sustainable and environmentally friendly plastic.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order to print larger.
HOW LONG?
We aim to print and get things shipped out to you within 4 weeks. However depending on volume or print failures it can take up to 6 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Qimir The Stranger Full Armour DIY Kit The Acolyte
*PLEASE NOTE- This is a DIY kit. The parts will need sanding, filling and painting and the fun is all in the build!
The enigmatic Qimir from The Acolyte series. Here we have all his hard parts needed for his cosplay; The Helmet, Gauntlet and ‘X’ brace. The Gauntlet comes in 2 main parts ‘clam shell’ style and joins with (4mm x 8mm) cylindrical neodymium magnets and the seam line is hidden along the textures of the gauntlet itself.
All parts are seperate for easier building and painting and as with all our helmets, accuracy is our obsession.
Actual Raw 3d printed parts received are:
Helmet
• Helmet Dome
• Helmet Face
• Helmet Jaw
• Chin Greeblies
• Teeth (6 partss
Gauntlet
• Gauntlet (2 Parts)
• Metal Greeblies (2 parts)
• ’X’ Brace
We are extremely proud of this model!
MATERIAL
Printed in PLA, a sustainable and environmentally friendly plastic.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order to print larger.
HOW LONG?
We aim to print and get things shipped out to you within 4 weeks. However depending on volume or print failures it can take up to 6 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Qimir The Stranger Full Armour DIY Kit The Acolyte
*PLEASE NOTE- This is a DIY kit. The parts will need sanding, filling and painting and the fun is all in the build!
The enigmatic Qimir from The Acolyte series. Here we have all his hard parts needed for his cosplay; The Helmet, Gauntlet and ‘X’ brace. The Gauntlet comes in 2 main parts ‘clam shell’ style and joins with (4mm x 8mm) cylindrical neodymium magnets and the seam line is hidden along the textures of the gauntlet itself.
All parts are seperate for easier building and painting and as with all our helmets, accuracy is our obsession.
Actual Raw 3d printed parts received are:
Helmet
• Helmet Dome
• Helmet Face
• Helmet Jaw
• Chin Greeblies
• Teeth (6 partss
Gauntlet
• Gauntlet (2 Parts)
• Metal Greeblies (2 parts)
• ’X’ Brace
We are extremely proud of this model!
MATERIAL
Printed in PLA, a sustainable and environmentally friendly plastic.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order to print larger.
HOW LONG?
We aim to print and get things shipped out to you within 4 weeks. However depending on volume or print failures it can take up to 6 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
