TC-14 / U-3PO Finished Helmet
TC-14 / U-3PO Finished Helmet
*Please Note - This is a fully finished hand made Helmet, 3d printed from my own design, built, filled, primed and custom painted.
The first droid we see in Episode 1: The Phantom Menace! TC-14 was a silver-plated TC-series protocol droid with feminine programming who was manufactured by Cybot Galactica. She served aboard the Trade Federation flagship, Saak'ak, where she frequently received memory wipes that left her permanently confused and with no personality. In 32 BBY, she was aboard the Saak'ak when it was part of the Federation's blockade of the planet Naboo.
OR
U-3PO was a 3PO-series protocol droid who served the Alderaanian Diplomatic Corps. After Imperial agents altered his programming, the droid became an unwitting spy in the royal court of the planet Alderaan, and was assigned to the CR90 corvette Tantive IV in 0 BBY. After the corvette fled from the Battle of Scarif carrying the plans to the Death Star superweapon, the Empire used U-3PO to track the vessel to the Tatoo system.
This is a 2 part helmet, joining with a catch at the top and then glue two M4 bolts into the actual droid neck bolts and tighten from there. He’s fully wearable and he also comes with a neck piece. The neck is not wearable and is more intended to prop him up for display purposes.
COLOURS
Can come ‘fresh’, or with minimal weathering or full on weathered/dirt effect or for any custom Colour variations you would like! Please add instructions to your order.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Lead time is currently 2 months.
SHIPPING
Sent carefully and well packaged.
UK Shipping £12.50 - Royal Mail Special Delivery.
Worldwide shipping available, cost is calculated at checkout. Sent well packaged.
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• As this is a hand made piece there will be small irregularities.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only. Please let us know if this is a present or for a certain date and we’ll endeavour to deliver it.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
TC-14 / U-3PO Finished Helmet
*Please Note - This is a fully finished hand made Helmet, 3d printed from my own design, built, filled, primed and custom painted.
The first droid we see in Episode 1: The Phantom Menace! TC-14 was a silver-plated TC-series protocol droid with feminine programming who was manufactured by Cybot Galactica. She served aboard the Trade Federation flagship, Saak'ak, where she frequently received memory wipes that left her permanently confused and with no personality. In 32 BBY, she was aboard the Saak'ak when it was part of the Federation's blockade of the planet Naboo.
OR
U-3PO was a 3PO-series protocol droid who served the Alderaanian Diplomatic Corps. After Imperial agents altered his programming, the droid became an unwitting spy in the royal court of the planet Alderaan, and was assigned to the CR90 corvette Tantive IV in 0 BBY. After the corvette fled from the Battle of Scarif carrying the plans to the Death Star superweapon, the Empire used U-3PO to track the vessel to the Tatoo system.
This is a 2 part helmet, joining with a catch at the top and then glue two M4 bolts into the actual droid neck bolts and tighten from there. He’s fully wearable and he also comes with a neck piece. The neck is not wearable and is more intended to prop him up for display purposes.
COLOURS
Can come ‘fresh’, or with minimal weathering or full on weathered/dirt effect or for any custom Colour variations you would like! Please add instructions to your order.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Lead time is currently 2 months.
SHIPPING
Sent carefully and well packaged.
UK Shipping £12.50 - Royal Mail Special Delivery.
Worldwide shipping available, cost is calculated at checkout. Sent well packaged.
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• As this is a hand made piece there will be small irregularities.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only. Please let us know if this is a present or for a certain date and we’ll endeavour to deliver it.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
TC-14 / U-3PO Finished Helmet
*Please Note - This is a fully finished hand made Helmet, 3d printed from my own design, built, filled, primed and custom painted.
The first droid we see in Episode 1: The Phantom Menace! TC-14 was a silver-plated TC-series protocol droid with feminine programming who was manufactured by Cybot Galactica. She served aboard the Trade Federation flagship, Saak'ak, where she frequently received memory wipes that left her permanently confused and with no personality. In 32 BBY, she was aboard the Saak'ak when it was part of the Federation's blockade of the planet Naboo.
OR
U-3PO was a 3PO-series protocol droid who served the Alderaanian Diplomatic Corps. After Imperial agents altered his programming, the droid became an unwitting spy in the royal court of the planet Alderaan, and was assigned to the CR90 corvette Tantive IV in 0 BBY. After the corvette fled from the Battle of Scarif carrying the plans to the Death Star superweapon, the Empire used U-3PO to track the vessel to the Tatoo system.
This is a 2 part helmet, joining with a catch at the top and then glue two M4 bolts into the actual droid neck bolts and tighten from there. He’s fully wearable and he also comes with a neck piece. The neck is not wearable and is more intended to prop him up for display purposes.
COLOURS
Can come ‘fresh’, or with minimal weathering or full on weathered/dirt effect or for any custom Colour variations you would like! Please add instructions to your order.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Lead time is currently 2 months.
SHIPPING
Sent carefully and well packaged.
UK Shipping £12.50 - Royal Mail Special Delivery.
Worldwide shipping available, cost is calculated at checkout. Sent well packaged.
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• As this is a hand made piece there will be small irregularities.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only. Please let us know if this is a present or for a certain date and we’ll endeavour to deliver it.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
