Rangefinder (Articulated) ONLY 3D Print Files
3D Print files for Rangefinder (Articulated) ONLY
PLEASE NOTE: This is a digital 3D print file, not a physical prop.
This is an articulated rangefinder for Phase I or Phase II Clone helmets (Or any custom). It has been designed so that it can be attached to the side of any helmet. Just drill a hole through your ear section.
It has a bolt that goes through both circular sections which has a thread on the inside. insert a screw and washer on the inside of the helmet and thread into the bolt.
The inner and Outer section of the circular articulation has a little nib and hole keeping it in upright position.
It is recommended that you use real metal screws and washers from strength and you may want to add magnets.
Available this pack are:
• RF Head
• RF Stalk
• RF Base (Outer)
• RF Base (Inner)
• RF Threadbolt
• Screw
• Washer
* Please Note - No helmet included.
Files will be available for immediate download from this site upon purchase and available for 5 days after..
Please only use for personal printing.
3D Print files for Rangefinder (Articulated) ONLY
PLEASE NOTE: This is a digital 3D print file, not a physical prop.
This is an articulated rangefinder for Phase I or Phase II Clone helmets (Or any custom). It has been designed so that it can be attached to the side of any helmet. Just drill a hole through your ear section.
It has a bolt that goes through both circular sections which has a thread on the inside. insert a screw and washer on the inside of the helmet and thread into the bolt.
The inner and Outer section of the circular articulation has a little nib and hole keeping it in upright position.
It is recommended that you use real metal screws and washers from strength and you may want to add magnets.
Available this pack are:
• RF Head
• RF Stalk
• RF Base (Outer)
• RF Base (Inner)
• RF Threadbolt
• Screw
• Washer
* Please Note - No helmet included.
Files will be available for immediate download from this site upon purchase and available for 5 days after..
Please only use for personal printing.
3D Print files for Rangefinder (Articulated) ONLY
PLEASE NOTE: This is a digital 3D print file, not a physical prop.
This is an articulated rangefinder for Phase I or Phase II Clone helmets (Or any custom). It has been designed so that it can be attached to the side of any helmet. Just drill a hole through your ear section.
It has a bolt that goes through both circular sections which has a thread on the inside. insert a screw and washer on the inside of the helmet and thread into the bolt.
The inner and Outer section of the circular articulation has a little nib and hole keeping it in upright position.
It is recommended that you use real metal screws and washers from strength and you may want to add magnets.
Available this pack are:
• RF Head
• RF Stalk
• RF Base (Outer)
• RF Base (Inner)
• RF Threadbolt
• Screw
• Washer
* Please Note - No helmet included.
Files will be available for immediate download from this site upon purchase and available for 5 days after..
Please only use for personal printing.
