Airborne Trooper Helmet - DIY Kit
Airborne Trooper DIY helmet Kit
This helmet kit is 501st approved. You had to be keen eyed to spot this guy; first seen in their 212th colours at the battle of Utapau in Revenge of the Sith. The Airborne Trooper or Clone Paratrooper were specially-trained for high-altitude drops. Their helmet and armour style was then re-assigned to specifically assist in hunting jedi as ‘Purge Troopers in ‘Jedi: Fallen order.’ With their large bulbous steps, mouth vent and inverted re-breathers, their helmets are one of the most uniques designs ever to hit Star Wars.
*Please Note - This is a DIY kit. parts will need to be assembled, filled, sanded and painted and the fun really is all in the build!
Actual raw 3D printed parts shipped are:
• Main helmet x 3 parts (Front, back, dome)
Accessories:
• Mouth grill
• Rebreathers - Inner and Outer x 2
•Ear Vents
• Side Vents
We are very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Replacement grinder shield, flexible material and can be cut with scissors.
COLOURS
We always try our best to print parts in their respective colours however, depending on filament demand, some pieces may differ in colour. As the helmet will be prepped and painted however this doesn't matter.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Airborne Trooper DIY helmet Kit
This helmet kit is 501st approved. You had to be keen eyed to spot this guy; first seen in their 212th colours at the battle of Utapau in Revenge of the Sith. The Airborne Trooper or Clone Paratrooper were specially-trained for high-altitude drops. Their helmet and armour style was then re-assigned to specifically assist in hunting jedi as ‘Purge Troopers in ‘Jedi: Fallen order.’ With their large bulbous steps, mouth vent and inverted re-breathers, their helmets are one of the most uniques designs ever to hit Star Wars.
*Please Note - This is a DIY kit. parts will need to be assembled, filled, sanded and painted and the fun really is all in the build!
Actual raw 3D printed parts shipped are:
• Main helmet x 3 parts (Front, back, dome)
Accessories:
• Mouth grill
• Rebreathers - Inner and Outer x 2
•Ear Vents
• Side Vents
We are very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Replacement grinder shield, flexible material and can be cut with scissors.
COLOURS
We always try our best to print parts in their respective colours however, depending on filament demand, some pieces may differ in colour. As the helmet will be prepped and painted however this doesn't matter.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Airborne Trooper DIY helmet Kit
This helmet kit is 501st approved. You had to be keen eyed to spot this guy; first seen in their 212th colours at the battle of Utapau in Revenge of the Sith. The Airborne Trooper or Clone Paratrooper were specially-trained for high-altitude drops. Their helmet and armour style was then re-assigned to specifically assist in hunting jedi as ‘Purge Troopers in ‘Jedi: Fallen order.’ With their large bulbous steps, mouth vent and inverted re-breathers, their helmets are one of the most uniques designs ever to hit Star Wars.
*Please Note - This is a DIY kit. parts will need to be assembled, filled, sanded and painted and the fun really is all in the build!
Actual raw 3D printed parts shipped are:
• Main helmet x 3 parts (Front, back, dome)
Accessories:
• Mouth grill
• Rebreathers - Inner and Outer x 2
•Ear Vents
• Side Vents
We are very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Replacement grinder shield, flexible material and can be cut with scissors.
COLOURS
We always try our best to print parts in their respective colours however, depending on filament demand, some pieces may differ in colour. As the helmet will be prepped and painted however this doesn't matter.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
