Clone Trooper Phase I (Realistic Style) DIY Kit
The very first iteration of the Republic Clone Trooper, with it’s Mandalorian style visor - a nod towards their clone host Jango Fett, it's Roman Empireesque mohawk and echoing throughout their design, the white minimalism of their birth home; Tipoca city on Kimono, everyone needs a Phase 1 in their collection!
This helmet has been designed from scratch to be as accurate as possible. In real life, the movie version of this helmet would be impossible to put on your head. We wanted to retainin the neck collar and it not look odd, so we widened the hole so that the helmet can be put on and taken off without removing entire sections like some alternative models.
The Nose grill and side vents are cut out allowing for real wire mesh to be added.
*Please note - This is a DIY kit. The first pictures are what is possible to make on your own from this kit.
HOW TO VIDEO of this exact helmet here.
Actual items shipped are the following Raw 3D printed parts:
• Main helmet in 3 parts (Front, Back and Dome)
• Comm Link
We are very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Replacement grinder shield, flexible material and can be cut with scissors.
COLOURS
We always try our best to print parts in their respective colours however, depending on filament demand, some pieces may differ in colour. As the helmet will be prepped and painted however this doesn't matter.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
The very first iteration of the Republic Clone Trooper, with it’s Mandalorian style visor - a nod towards their clone host Jango Fett, it's Roman Empireesque mohawk and echoing throughout their design, the white minimalism of their birth home; Tipoca city on Kimono, everyone needs a Phase 1 in their collection!
This helmet has been designed from scratch to be as accurate as possible. In real life, the movie version of this helmet would be impossible to put on your head. We wanted to retainin the neck collar and it not look odd, so we widened the hole so that the helmet can be put on and taken off without removing entire sections like some alternative models.
The Nose grill and side vents are cut out allowing for real wire mesh to be added.
*Please note - This is a DIY kit. The first pictures are what is possible to make on your own from this kit.
HOW TO VIDEO of this exact helmet here.
Actual items shipped are the following Raw 3D printed parts:
• Main helmet in 3 parts (Front, Back and Dome)
• Comm Link
We are very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Replacement grinder shield, flexible material and can be cut with scissors.
COLOURS
We always try our best to print parts in their respective colours however, depending on filament demand, some pieces may differ in colour. As the helmet will be prepped and painted however this doesn't matter.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
The very first iteration of the Republic Clone Trooper, with it’s Mandalorian style visor - a nod towards their clone host Jango Fett, it's Roman Empireesque mohawk and echoing throughout their design, the white minimalism of their birth home; Tipoca city on Kimono, everyone needs a Phase 1 in their collection!
This helmet has been designed from scratch to be as accurate as possible. In real life, the movie version of this helmet would be impossible to put on your head. We wanted to retainin the neck collar and it not look odd, so we widened the hole so that the helmet can be put on and taken off without removing entire sections like some alternative models.
The Nose grill and side vents are cut out allowing for real wire mesh to be added.
*Please note - This is a DIY kit. The first pictures are what is possible to make on your own from this kit.
HOW TO VIDEO of this exact helmet here.
Actual items shipped are the following Raw 3D printed parts:
• Main helmet in 3 parts (Front, Back and Dome)
• Comm Link
We are very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Replacement grinder shield, flexible material and can be cut with scissors.
COLOURS
We always try our best to print parts in their respective colours however, depending on filament demand, some pieces may differ in colour. As the helmet will be prepped and painted however this doesn't matter.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
