Commander Cody (Realistic Style) DIY Kit
Here we have everyones ‘order 66 executing Clone’ Commander Cody.
This helmet has been designed from scratch to be as accurate as possible. All parts have been designed around our regular Phase 2 Clone trooper helmet. Each part is seperate for easier printing, building and painting. This is the full DIY kit including the helmet. For the Cody Accessories only please click here.
In real life this helmet would be impossible to put on your head. It is a one piece model bar the accessories. We wanted to widen the bottom hole whilst retaining the neck line so that the helmet can be put on and taken off without removing entire sections like alternative models.
The Nose grill is cut out allowing for real wire mesh to be added.
*Please note - This is a DIY kit. The parts will need to be glued, filled, sanded, primed and painted. Actual items received are the following 3D Printed parts:
• Main helmet
Accessories:
• Comm Link x 2 parts
• Ear Block
• Rebreathers including textured version, or 2 part piece that you can install your own wire mesh for more realism.
Cody Accessories:
• Rear Antenna
• Rear Antenna Bracket
• Left Antenna
• Left Antenna Base
• Heavy Head Pieces x 2
• Head Ring
• Moustache
• Special Mouth Commlink
• Camera Sensor
• Cody Sun Visor
We are very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Replacement grinder shield, flexible material and can be cut with scissors.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
UK Shipping £12.50 - Royal Mail Special Delivery.
Worldwide shipping available, cost is calculated at checkout. Sent well packaged.
Here we have everyones ‘order 66 executing Clone’ Commander Cody.
This helmet has been designed from scratch to be as accurate as possible. All parts have been designed around our regular Phase 2 Clone trooper helmet. Each part is seperate for easier printing, building and painting. This is the full DIY kit including the helmet. For the Cody Accessories only please click here.
In real life this helmet would be impossible to put on your head. It is a one piece model bar the accessories. We wanted to widen the bottom hole whilst retaining the neck line so that the helmet can be put on and taken off without removing entire sections like alternative models.
The Nose grill is cut out allowing for real wire mesh to be added.
*Please note - This is a DIY kit. The parts will need to be glued, filled, sanded, primed and painted. Actual items received are the following 3D Printed parts:
• Main helmet
Accessories:
• Comm Link x 2 parts
• Ear Block
• Rebreathers including textured version, or 2 part piece that you can install your own wire mesh for more realism.
Cody Accessories:
• Rear Antenna
• Rear Antenna Bracket
• Left Antenna
• Left Antenna Base
• Heavy Head Pieces x 2
• Head Ring
• Moustache
• Special Mouth Commlink
• Camera Sensor
• Cody Sun Visor
We are very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Replacement grinder shield, flexible material and can be cut with scissors.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
UK Shipping £12.50 - Royal Mail Special Delivery.
Worldwide shipping available, cost is calculated at checkout. Sent well packaged.
Here we have everyones ‘order 66 executing Clone’ Commander Cody.
This helmet has been designed from scratch to be as accurate as possible. All parts have been designed around our regular Phase 2 Clone trooper helmet. Each part is seperate for easier printing, building and painting. This is the full DIY kit including the helmet. For the Cody Accessories only please click here.
In real life this helmet would be impossible to put on your head. It is a one piece model bar the accessories. We wanted to widen the bottom hole whilst retaining the neck line so that the helmet can be put on and taken off without removing entire sections like alternative models.
The Nose grill is cut out allowing for real wire mesh to be added.
*Please note - This is a DIY kit. The parts will need to be glued, filled, sanded, primed and painted. Actual items received are the following 3D Printed parts:
• Main helmet
Accessories:
• Comm Link x 2 parts
• Ear Block
• Rebreathers including textured version, or 2 part piece that you can install your own wire mesh for more realism.
Cody Accessories:
• Rear Antenna
• Rear Antenna Bracket
• Left Antenna
• Left Antenna Base
• Heavy Head Pieces x 2
• Head Ring
• Moustache
• Special Mouth Commlink
• Camera Sensor
• Cody Sun Visor
We are very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Replacement grinder shield, flexible material and can be cut with scissors.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
UK Shipping £12.50 - Royal Mail Special Delivery.
Worldwide shipping available, cost is calculated at checkout. Sent well packaged.