Jango Fett Helmet DIY Kit
Jango Fett Helmet DIY Kit
The father of all clones himself, dad to Boba and ‘short work’ made of by Mace Windu; Jango Fett.
Jango Fett was a famed Mandalorian human male bounty hunter and the clone template of the Grand Army of the Republic. Known as the best bounty hunter in the galaxy during the final years of the Galactic Republic, Fett was proficient in marksmanship as well as unarmed combat.
You can use 2 x (4mm diameter x 1mm thick) N42 Neodymium Magnets for the rangefinder to keep it at upright or lowered position. The right ear mechanism all snaps into place but we would recommend glue.
The Rangefinder Head has been designed to fit the Electronic Circuit Board by Westaby Electronics on Etsy.
*Please note - This is a raw 3D Printed DIY kit. The first images are what you can make on your own, and the fun really is all in the build! The parts will need to be glued, filled, sanded, primed and painted. Actual items received are the following raw 3D Printed parts:
• Main helmet
• Left Ear
• Right ear Inner
• Right ear Outer
• Right ear Lower
• RF Stalk
• RF Head Hollow
• RF Head Solid
• RF Acrylic
• RF Camera
• Borden Connector
• Back Grill
We're very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Circuitboard made by Westaby Electronics with 2 x Red flashing LED’s and 1 x White LED. Runs on a CR2032 watch battery (Not included). Rangefinder lights are required for 501st Approval.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Jango Fett Helmet DIY Kit
The father of all clones himself, dad to Boba and ‘short work’ made of by Mace Windu; Jango Fett.
Jango Fett was a famed Mandalorian human male bounty hunter and the clone template of the Grand Army of the Republic. Known as the best bounty hunter in the galaxy during the final years of the Galactic Republic, Fett was proficient in marksmanship as well as unarmed combat.
You can use 2 x (4mm diameter x 1mm thick) N42 Neodymium Magnets for the rangefinder to keep it at upright or lowered position. The right ear mechanism all snaps into place but we would recommend glue.
The Rangefinder Head has been designed to fit the Electronic Circuit Board by Westaby Electronics on Etsy.
*Please note - This is a raw 3D Printed DIY kit. The first images are what you can make on your own, and the fun really is all in the build! The parts will need to be glued, filled, sanded, primed and painted. Actual items received are the following raw 3D Printed parts:
• Main helmet
• Left Ear
• Right ear Inner
• Right ear Outer
• Right ear Lower
• RF Stalk
• RF Head Hollow
• RF Head Solid
• RF Acrylic
• RF Camera
• Borden Connector
• Back Grill
We're very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Circuitboard made by Westaby Electronics with 2 x Red flashing LED’s and 1 x White LED. Runs on a CR2032 watch battery (Not included). Rangefinder lights are required for 501st Approval.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Jango Fett Helmet DIY Kit
The father of all clones himself, dad to Boba and ‘short work’ made of by Mace Windu; Jango Fett.
Jango Fett was a famed Mandalorian human male bounty hunter and the clone template of the Grand Army of the Republic. Known as the best bounty hunter in the galaxy during the final years of the Galactic Republic, Fett was proficient in marksmanship as well as unarmed combat.
You can use 2 x (4mm diameter x 1mm thick) N42 Neodymium Magnets for the rangefinder to keep it at upright or lowered position. The right ear mechanism all snaps into place but we would recommend glue.
The Rangefinder Head has been designed to fit the Electronic Circuit Board by Westaby Electronics on Etsy.
*Please note - This is a raw 3D Printed DIY kit. The first images are what you can make on your own, and the fun really is all in the build! The parts will need to be glued, filled, sanded, primed and painted. Actual items received are the following raw 3D Printed parts:
• Main helmet
• Left Ear
• Right ear Inner
• Right ear Outer
• Right ear Lower
• RF Stalk
• RF Head Hollow
• RF Head Solid
• RF Acrylic
• RF Camera
• Borden Connector
• Back Grill
We're very proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED! + £12.00
Circuitboard made by Westaby Electronics with 2 x Red flashing LED’s and 1 x White LED. Runs on a CR2032 watch battery (Not included). Rangefinder lights are required for 501st Approval.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
