Tusken Raider Child DIY Kit (TBOBF)
Tusken Raider The Book of Boba Fett Style DIY Helmet Kit
The cute little compadre of Boba Fett. This helmet uses our TBOBF Tusken base helmet but with oversized binoculars, nose, blood spitters and top spikes and has an elongated Respirator.
*Please Note - This is a raw 3D printed kit. The first photos are what you can make on your own from this kit. The parts will need to be assembled, filled, sanded and painted and the fun really is all in the build!
Fabric and leather is not included. Actual 3D printed parts received are:
• Main helmet (x 4 parts; Front, back, dome and snout)
Accessories:
• Binoculars x 2
• Nose
• Blood Spitters x 2
• Head Spikes x 4
• Respirator
• Respirator End Pieces
We're very proud of this helmet!
The only parts that need to be post-processed are the accessories themselves. The helmet gives you the perfect base to add leather and fabric wraps. The helmet also comes in three parts and can either be glued as one piece or you can add flexible fabric in-between to allow for more movement. It also comes with the respirator and end pieces so all you need is 5mm diameter bendable aluminium tubing.
SIZING
As this is more of a mask than a helmet, we modelled it to be more like a second skin (with a little breathing room) so not to appear too large once fabric is added. This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
UK Shipping £12.50 - Royal Mail Special Delivery.
Worldwide shipping available, cost is calculated at checkout. Sent well packaged.
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• As this is a hand made piece there will be small irregularities.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Tusken Raider The Book of Boba Fett Style DIY Helmet Kit
The cute little compadre of Boba Fett. This helmet uses our TBOBF Tusken base helmet but with oversized binoculars, nose, blood spitters and top spikes and has an elongated Respirator.
*Please Note - This is a raw 3D printed kit. The first photos are what you can make on your own from this kit. The parts will need to be assembled, filled, sanded and painted and the fun really is all in the build!
Fabric and leather is not included. Actual 3D printed parts received are:
• Main helmet (x 4 parts; Front, back, dome and snout)
Accessories:
• Binoculars x 2
• Nose
• Blood Spitters x 2
• Head Spikes x 4
• Respirator
• Respirator End Pieces
We're very proud of this helmet!
The only parts that need to be post-processed are the accessories themselves. The helmet gives you the perfect base to add leather and fabric wraps. The helmet also comes in three parts and can either be glued as one piece or you can add flexible fabric in-between to allow for more movement. It also comes with the respirator and end pieces so all you need is 5mm diameter bendable aluminium tubing.
SIZING
As this is more of a mask than a helmet, we modelled it to be more like a second skin (with a little breathing room) so not to appear too large once fabric is added. This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
UK Shipping £12.50 - Royal Mail Special Delivery.
Worldwide shipping available, cost is calculated at checkout. Sent well packaged.
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• As this is a hand made piece there will be small irregularities.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Tusken Raider The Book of Boba Fett Style DIY Helmet Kit
The cute little compadre of Boba Fett. This helmet uses our TBOBF Tusken base helmet but with oversized binoculars, nose, blood spitters and top spikes and has an elongated Respirator.
*Please Note - This is a raw 3D printed kit. The first photos are what you can make on your own from this kit. The parts will need to be assembled, filled, sanded and painted and the fun really is all in the build!
Fabric and leather is not included. Actual 3D printed parts received are:
• Main helmet (x 4 parts; Front, back, dome and snout)
Accessories:
• Binoculars x 2
• Nose
• Blood Spitters x 2
• Head Spikes x 4
• Respirator
• Respirator End Pieces
We're very proud of this helmet!
The only parts that need to be post-processed are the accessories themselves. The helmet gives you the perfect base to add leather and fabric wraps. The helmet also comes in three parts and can either be glued as one piece or you can add flexible fabric in-between to allow for more movement. It also comes with the respirator and end pieces so all you need is 5mm diameter bendable aluminium tubing.
SIZING
As this is more of a mask than a helmet, we modelled it to be more like a second skin (with a little breathing room) so not to appear too large once fabric is added. This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
UK Shipping £12.50 - Royal Mail Special Delivery.
Worldwide shipping available, cost is calculated at checkout. Sent well packaged.
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• As this is a hand made piece there will be small irregularities.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
